Request Information
Barymat M-100D has a 1.0 lb. per sq. ft. barrier combined with a deep embossed vinyl 'carpet-like' wear surface and a 0.25 in. polyurethane foam spacer. It is designed for applications that require high sound transmission loss, good heat insulation and abrasion resistance. This floor mat is easy to install and is suitable for permanent or semi-permanent installations.
Unit of Measure

Typical Physical Properties

Thermal Conductivity of Foam at 75°F (24°C)

 N/A ASTM C 518 — 0.27 Btu. in. / hr. ft.² ºF

Flammability

 N/A MVSS 302 - Passes

Composite Weight

 N/A 1.2 lb. / sq. ft.

Applications and Product Data

Uses

 N/A
  • Vehicle Floors and Fire Wall Barrier
  • Control Room Floors
BARYMAT M-100D is easy to apply and can be cut with common utility knives. For secure and permanent installations use specified adhesive - available from FirwinCorp.

Thickness

 N/A 0.375 in. - overall composite thickness.

Standard Dimensions

 N/A Sheets: 54" wide X 72", untrimmed (27 sq.ft.)
CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED

Performance Data

N/A Performance data is an extract from NRC - Ottawa report on tests according to ASTME 90-90 with material adhered to 16 ga. steel.



NOTICE: Stated performance data is based on recognized testing methods. Product performance can be affected by field conditions and installation methods. Users of these products are responsible for determining suitability for their application and compliance with any legal provisions including those relating to health and safety.

Transmission Loss

N/A

Frequency (Hz) Transmission Loss (dB) M - 100D
80 23
100 22
125 22
160 22
200 22
250 22
315 21
400 24
500 28
630 32
800 37
1000 41
1250 45
1600 47
2000 47
2500 47
3150 51
4000 55
5000 58
6300 58
STC 33

© 2024 ThermoWrap, A Division of Firwin, All Rights ReservedSite created by Thomas Web Solutions and powered by Navigator Platform