Item # MTPPT-3, Silicone Fiberglass Coated Tape; 3"W, 100 ft/roll On Firwin Corp.

Silicone Coated Fiberglass Tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 500ºF and will withstand a molten splash at 2200ºF. Made of either knitted or braided fiberglass yarns in a flexible substrate, it is thenmore

Unit of Measure

Physical Properties | Specifications

Physical Properties

Tensile strength	N/A 450,000-500,000 psi.
Tape Material	N/A Fiberglass
Coating Material	N/A Silicone Rubber
Fiber Type	N/A E Glass
Breaking Tenacity	N/A 1.71 gf/TEX Wet 1.71 gf/TEX. Std.
Breaking Elongation	N/A 4.81% Std. 4.81% Wet
Elastic Recovery	N/A 100%
Average Stiffness	N/A 2824.3 cn/TEX
Specific Gravity	N/A 2.54-2.69
Effect of Heat	N/A Melts at 1121-1182degC Softens at 732-877degC Will not burn
Effect of Acids and Alkalis	N/A Resistance to acids is fair Good resistance to most alkalis.
Effect of bleaches and solvents	N/A Unaffected
Durometer, Shore A	N/A 35 (initial) 45 (aged 240hrs.@ 200degC)
Tensile Strength (psi.)	N/A 800 (aged 240hrs.@ 200degC) 875 (initial)
Elongation %	N/A 200 (aged 240hrs.@ 200degC) 500 (initial)
Flammability, UL94	N/A V-1
Dielectric Strength	N/A 485 volts/mil

Specifications

Width	N/A 3inches 76 mm
Tape Weight¹	N/A 14.2 lbs/100ft

¹ xx in the item number denotes packaging. Standard packaging for sleeving is either 50ft.or 100ft/ box; tape 100ft./roll.
Other sizes and cut lengths available. Consult factory for details and ordering information. Minimum order $100.00

Physical Properties

Tensile strength

Tape Material

Coating Material

Fiber Type

Breaking Tenacity

Breaking Elongation

Elastic Recovery

Average Stiffness

Specific Gravity

Effect of Heat

Effect of Acids and Alkalis

Effect of bleaches and solvents

Durometer, Shore A

Tensile Strength (psi.)

Elongation %

Flammability, UL94

Dielectric Strength

Specifications

Width