Wildamp Sheet Form Sound Deadeners control resonant vibrations on sheet metal structures and also reduce the loudness and duration of random impact noises.
Wildamp is a filled viscoelastic asphalt/polymer acoustical sheeting material designed for cost- effective vibration damping.
Wildamp has a pressure sensitive adhesive backing which is protected by an easily strippable liner. The permanent acrylic adhesive exhibits high tack resulting in 100% contact for maximum damping effectiveness.
Solvents may leach small amounts of asphalt from material - but it will not be damaged.
Paintable-improves solvent resistance.
Application Guidelines
General Use Rule
Up to 20 Ga. use .070 in. Up to 16 Ga. use .118 in. For thicker panels use up to 2 times panel thickness by combining layers. Full coverage is best but adequate results can often be obtained by treating- the middle or most active part of the panel. Experiment with progressively larger treated areas until desired reductions have been achieved.
Directions for Use
Wildamp can be easily cut with common utility knives or can be ordered die cut to size.
It is recommended that Wildamp be applied at room temperatures (60º F plus). When bonding to metal surfaces, simply remove the release liner and press firmly into position using a roller to ensure total surface contact. The surfaces must be clean and dry. Where surfaces are problematic, a pre-coating of EC 1099 Plastic Adhesive will aid adhesion.
