Firwin Corporation
1685 Flint Road
Toronto, ON M3J 2W8
Tel: 416.745.9389 • Fax: 416.745.0782
Email: firwin@firwin.com • Website: www.firwin.com
All Categories > Stocked Insulation and Safety Products > Sound Attenuation > AcoustiGuard™ LAG 'FR' and LAG 'FRC' Acoustical Pipe / Duct Lagging > Part # Model LAG 'FRC’  


Part # Model LAG 'FRC’, AcoustiGuard™ LAG 'FRC' Acoustical Pipe / Duct Lagging

Model LAG 'FRC’ is available with a nominal 1" thick quilted fiberglass decoupler which allows the vinyl barrier to float independently of the noise source thus maximizing performance.

Model LAG 'FR' & 'FRC’ has an operating temperature of -40° to 220°F. The barrier component is available in 54" X 60' rolls. The composite is available in 54" X 30' rolls. The composite incorporates a 1" quilted fiberglass decoupler which allows for a one step installation process. This significantly reduces installation labour and enhances noise reduction properties. Simply cut to length and secure in place using FSK tape, duct tape, bands or mechanical fasteners.





Specifications  · Product Properties

Specifications

Applications
  • Process Piping
  • Duct Work
  • Heat Exchangers
  • Valves
  • Mixing Boxes
  • Material Transfer Lines
  • Petro-Chemical and Wastewater Treatment Plants
  • Gas Utility Pressure- Reducing Stations
  • Commercial and Residential H.V.A.C. Applications

Material Roll Size
54" X 60' Barrier Only
54" X 30' Composite

Benefits
STC - Up to 27.
Fire Safe - Meets Class 1 when properly installed. Low smoke and flame spread.
Easy Installation - Using bands, matching lag tape or mechanical fasteners.
No Down Time - Can be installed during normal equipment operation No shut down required.
Durable - Tear arid puncture resistance. Offers moisture, oil and chemical resistance Will not rot, shrink or cause metal corrosion.


Product Properties

Sound Transmission Loss
Frequency, Hz. TL, dB
125 15
250 19
500 21
1000 28
2000 33
4000 37
STC 27

Surface Burning Characteristics perASTME84
Flame Spread Index : 10
Smoke Devel. Index : 40

Flammability per Fed. Test Std. No. 191-5903
Flame Out: 0 Seconds
Afterglow: 0 Seconds
Char length: 0.2 Seconds

Service Temperature
-40º to 220ºF.

Corrosion Resistance
Excellent for most oils, grease, acids and mild alkalis.

Material Thickness
0.10" Barrier; 1.0" Composite.



Print Back