Firwin Corporation
1685 Flint Road
Toronto, ON M3J 2W8
Tel: 416.745.9389 • Fax: 416.745.0782
Email: firwin@firwin.com • Website: www.firwin.com
All Categories > Stocked Insulation and Safety Products > Sound Attenuation > AcoustiGuard™ Quilted Absorption Panels > Part # AF  


Part # AF, AcoustiGuard™ Quilted Absorption Panels

Fiberglass with Fabric Facing and Scrim Back.





Specifications  · Performance Data  · High Performance Noise Control  · Panel Configuration  · Panel Configuration Specifications  · Installation  · Common Styles

Specifications

Applications
  • Noise Absorbing Liners for Engine Compartments and Equipment Housings.
  • Absorptive Lining for Factory Walls or Other Reflective Surfaces.
  • Attractive Suspended Baffles.
  • Decorative Cloth Facings for Architectural Applications.

Attractive Surface Finish
Vinyl coated fiberglass cloth is quilted directly to the fiberglass absorber using high strength thread. Available in attractive 'diamond' or 'straight' quilt pattern.

Flammability
Meets Class 1 requirements. Low smoke and flame spread.

Custom Panels
CUSTOM PANELS can be manufactured to fit the interiors of equipment housing and cabinets. Quilted absorption panels are contamination resistant and suitable for low or high temperature applications.

Custom panels can be fitted with mechanical fasteners or Hook and Loop strips for easy installation and removal.

Material
Fiberglass

Material Thickness
1"


Performance Data
Frequency (Hz) Absorption Coefficient (AF)
125 0.12
250 0.47
500 0.85
1000 0.84
2000 0.64
4000 0.62
NRC 0.7




High Performance Noise Control
AcoustiGuard™ AF is an attractive, fire rated absorption panel that can be easily attached to any 'hard surface' or hung as acoustic baffles.

These quilted panels are designed to reduce reverberant (reflected) noise and absorb broadcast noise along transmission paths. They are ideal for surfaces in large open areas like factory walls and gymnasiums. Other treatments include noise absorbing liners for operator stations or equipment housings.


Panel Configuration
Acoustic glass fiber is quilted in a 'diamond' or 'straight' pattern and faced with a vinyl coated fiberglass cloth resistant to most industrial contaminants. The back of the panel is faced with a fire rated scrim - face goods optional on both surfaces. All panel edges are bound and fitted with grommets and Hook & Loop style fasteners as required.


Panel Configuration Specifications

Standard Thickness
1" and 2" nominal with special orders for panels up to 4" thick.

Standard Width
From 54" rollgoods, 50' long rolls in 1 inch absorber, 25' long rolls in 2 inch absorber. Custom sizes and shapes available.

Standard Facing
Minus 20° to 180°F temperature range.

Optional high temperature facing up to 550°F is available.

Colors
Silver/grey (standard) and optional beige. Special panels can be made using different facings or films for specific environmental application.


Installation
Installation is fast and easy using standard mechanical fasteners. It is recommended that wall panels be installed on 1" or 2" furring strips or stand off tubes. This will allow panels to clear most piping and conduit. Performance can actually be increased by utilizing this air gap.


Common Styles
Illustration shows the composite layers of AcoustiGuard™ AF series panels.

  1. VINYL COATED FIBERGLASS CLOTH (Silver/Grey colour standard, beige available)
  2. 1" or 2" ACOUSTIC GLASS FIBER (quilted with cloth cover)
  3. SCRIM or OPTIONAL FACE GOODS



Print Back