Print Back
Firwin SW1800 is a unique insulating blanket material with excellent performance in high-temperature applications with stability and resistance to chemical attack. SW1800 is unaffected by incidental spills of oil or water. Thermal and physical properties are restored after drying. This product hasmore
Unit of Measure

Specifications

Applications

Blanket
  • Removable insulation blankets
  • Furnace kiln, reformer and boiler lining
  • Laboratory ovens
  • Furnace door lining and seals
  • Furnace repair
  • Annealing furnace linings
  • Investment casting mold wrap
  • Stress - relieving blankets
  • Reusable steam and gas turbine insulation
  • Expansion joints packing
  • High temperature gasketing
  • Fire protection
  • Acoustical service
  • Cryogenic insulation

Health and Safety

FW1800 is exonerated from any carcinogenic classification in the countries of the European Union under provisions of Directive 97/69/EC. They are therefore exempt from the requirement for labeling for carcinogenicity. Tests were carried out at the Fraunhofer Institute for Inhalation Toxicology in Hannover, Germany.

FW1800 blanket is classified per UL 723 (ASTM E-84) Flame Spread Rating = 0, Smoke Developed Rating = 0. It is also classified by Underwriters Laboratories under “Batts and Blankets (BKNV)” in the UL Building Materials Directory, No. R8418. FW1800 is US Coast Guard approved for Steel and Aluminum vessels now defined under IMO Res.A.754(18)., complies with SOLAS safety objectives, and Fire Resisting Division for High Speed Craft (HSC).

Physical Properties

Colors

White

Thickness

1/2-2 in 6.25 - 50 mm
Density1 4, 6, 8 pcf 64,96,128 kg/m3

Melting point, °F (°C)

2680ºF (1470ºC)

Maximum Temperature Rating

2012ºF (1100ºC)

Continuous use limit, °F (°C)

1832ºF (1000ºC)

Width

24, 48 in. 600, 1200 mm

Typical linear shrinkage, nominal % 24 hrs

@1000ºF (538ºC) – 2
@1800ºF (982ºC) – 3
@2282ºF (1250ºC) – <2

Chemical Analysis

Silica, SiO2 60 - 70
Calcium Oxide, CaO 25 - 35
Magnesium Oxide, MgO 4 - 7
Zirconia, ZrO2 -
Alumina, Al2O3 trace

Thermal Conductivity, Btu•in/hr•ft²•°F (w/m•k) (ASTM 201)

Blanket 607 (8 pcf)

Mean temperature Btu • in/hr • ft2 • ºF w/m • k
@500ºF (260ºC) 0.46 0.06
@1000ºF (538ºC) 0.97 0.14
@1500ºF (816ºC) 1.65 0.24
@1800ºF(982ºC) 2.09 0.3

Data are average results of tests conducted under standard procedures and are subject to variation. Data contained in this brochure are intended as a guide only.
  • 1 4pcf only available in 1/2 up to 2" ** 2" thick, 48"wide only