Thermo Wrap - A Division of FirwinThermo Wrap, A Division of Firwin
1685 Flint Road
Toronto, ON M3J 2W8
Phone: 416.745.9389 • Fax: 416.745.0782
Email: info@firwinthermowrap.com • Website: www.firwinthermowrap.com

Print Back
Conasorb V is a combination of a perforated vinyl film bonded to a polyester polyurethane foam. The perforated vinyl film provides a scuff and wear resistant surface that is suitable for dusty or moderately dirty environments where it is not exposed to contaminants such as direct oil or water spray. CONASORB V is ideal as an enclosure or room surface absorber where a functionally attractive and cleanable surface is desired. The vinyl film surface is available standard beige, grey or black.
Unit of Measure
Items Conasorb V
V-50
Conasorb V 		Conasorb V
V-100
Conasorb V 		Conasorb V
V-200
Conasorb V
Uses N/A
  • Enclosure Liner
  • Room Surface Absorber
  • Equipment Cab Liner
  • Silencer Liner
CONASORB V is easy to apply and can be cut with common utility knives. For secure and permanent installations use specified adhesive - available from Flrwin Corp.
Thickness N/A 0.5 in. N/A 1.0 in. N/A 2.0 in.
Standard Dimensions N/A Sheets: 54" wide X 72", untrimmed (27 sq. ft.)
Rolls: 54" wide rolls (V-50 and V-100 only)
CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED 		N/A Sheets: 54" wide X 72", untrimmed (27 sq. ft.)
Rolls: 54" wide rolls (V-50 and V-100 only)
CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED 		N/A Sheets: 54" wide X 72", untrimmed (27 sq. ft.)
CUSTOM TRIMMING AND DIE CUTTING CAN BE PROVIDED
Performance Data N/A Performance data is an extract from NRC - Ottawa report on tests according to ASTM C 423-90a.



NOTICE: Stated performance data is based on recognized testing methods. Product performance can be affected by field conditions and installation methods. Users of these products are responsible for determining suitability for their application and compliance with any legal provisions including those relating to health and safety.
Density N/A ASTM D 3574-86 — 1.8 - 2.2 lb. / cu. ft.
Tensile Strength of Foam N/A ASTM D 3574-86 — 15 psi, minimum
Tear Strength of Foam N/A ASTM D 3574-86 — 2.0 lb. / in. minimum
Flammability N/A MVSS 302 - Passes
Thermal Conductivity of Foam at 75°F (24°C) N/A ASTM C 518 - 0.27 Btu. in. / hr. ft.² ºF
Absorption Coefficient N/A
Frequency (Hz) Absorption Coefficient V-50
80 0.03
100 0.03
125 0.07
160 0.07
200 0.06
250 0.07
315 0.1
400 0.14
500 0.2
630 0.25
800 0.33
1000 0.44
1250 0.57
1600 0.75
2000 0.88
2500 0.94
3150 0.84
4000 0.72
5000 0.57
6300 0.49
NRC 0.4
N/A
Frequency (Hz) Absorption Coefficient V-100
80 0.1
100 0.1
125 0.12
160 0.15
200 0.19
250 0.24
315 0.33
400 0.44
500 0.61
630 0.77
800 0.93
1000 1.03
1250 1.03
1600 0.91
2000 0.77
2500 0.64
3150 0.67
4000 0.79
5000 0.83
6300 0.68
NRC 0.65
N/A
Frequency (Hz) Absorption Coefficient V-200
80 0.07
100 0.2
125 0.27
160 0.41
200 0.61
250 0.84
315 1.03
400 1.1
500 1.11
630 1.03
800 0.94
1000 0.86
1250 0.82
1600 0.83
2000 0.81
2500 0.78
3150 0.75
4000 72
5000 0.65
6300 0.62
NRC 0.9