Firwin Corp. - Silicone Coated Fiberglass Sleeves

High grade Silicone rubber bonded to fiberglass sleeving

Silco Sleeve is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 500ºF and will withstand a molten splash at 2200ºF. Made of either knitted or braided fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber.

Resistant to hydraulic fluids, lubricating oils, and fuels, Silco Sleeve insulates against energy loss in piping and hosing; protects employees from burns; and allows "bundling" of wires, hoses, and cables. The braided version allows qualified hose assemblies to pass AS1055D testing under stated flow and pressure conditions.

For items and sizes not listed here, please contract Firwin directly

Unit of Measure

Items	MPJ-0.375 Silicone Coated Fiberglass Sleeve 3/8" Nominal I.D. List Price CAD398.47	MPJ-3.500 Silicone Coated Fiberglass Sleeve 3-1/2" Nominal I.D. List Price CAD3,675.50
Weight¹	N/A 12	N/A 98
Tensile strength	N/A
Nominal I.D.	N/A 3/8"	N/A 3-1/2"
Coating Material	N/A Red Silicone
Fiber Type	N/A Fiberglass
Breaking Tenacity	N/A
Breaking Elongation	N/A
Elastic Recovery	N/A
Average Stiffness	N/A
Specific Gravity	N/A
Effect of Heat	N/A
Effect of Acids and Alkalis	N/A
Effect of bleaches and solvents	N/A
Durometer, Shore A	N/A
Tensile Strength (psi.)	N/A
Elongation %	N/A
Flammability, UL94	N/A
Dielectric Strength	N/A
Roll Length	N/A 100'
¹ xx in the item number denotes packaging. Standard packaging for sleeving is either 50ft.or 100ft/ box; tape 100ft./roll. Other sizes and cut lengths available. Consult factory for details and ordering information. Minimum order $100.00