Part # BARYFOL BM-1C, High Efficiency Noise Control Barrier On Firwin Corp.

Products Insulation and
Safety Products Insulation Solutions by Industry Insulation Applications

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Stocked Insulation and Safety Products > Sound Attenuation > High Efficiency - Economical Noise Control Barrier > Part # BARYFOL BM-1C


	Part # BARYFOL BM-1C, High Efficiency Noise Control Barrier

This versatile acoustic composite material consists of:

OUTER FACE OF ABRASION RESISTANT CLEAR FILM
UMP, DENSE, HEAVY LAYER OF BARYFOL NOISE BARRIER
FLEXIBLE DECOUPLING LAYER OF URETHANE FOAM

BM-1C may be cut with a sharp knife into suitable shapes to cover panels, ducts etc. Easily bent around curves or corners - it will not crack during or after installation. Paper templates should be prepared for complex curves and shapes. It should be overlapped at joints rather than butt jointed. May be held in place with our EC 1099 adhesive - tape - wire - strap or nails and screws.

Specifications · Material Specifications

Specifications

Applications

Indoor and Outdoor Use

Ducting
Piping
Gas lines
Cyclones
Fans
Stacks
Blowers
Pumps
Machine Housings
Cabinets
Panels
Hydraulic Systems
Ceilings and Walls

Noise Levels

20 - 60 db Reductions

Chart shows typical performance when bonded to 16 gauge steel. Performance will vary according to mass (thickness) of material it is adhered to.

Transmission Loss Chart

FREQUENCY -Hz	125	250	500	1000	2000	4000
TRANSMISSION LOSS db	25	30	33	35	48	62

Material Specifications

Sheet Size		54" x 72" (27 SQ. FT.)

Roll Size		54" x 30' (135 SQ. FT.)

Material Thickness		APPROX. 3/8"

Barrier Weight		1.6 LBS./SQ. FT.

Part # BARYFOL BM-1C, High Efficiency Noise Control Barrier

Applications

Noise Levels

Sheet Size

Roll Size

Material Thickness

Barrier Weight