Part # UF-50, Conasorb UF On Firwin Corp.

Products Insulation and
Safety Products Insulation Solutions by Industry Insulation Applications

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Stocked Insulation and Safety Products > Sound Attenuation > Conasorb UF > Part # UF-50


	Part # UF-50, Conasorb UF

larger image

CONASORB UF is a combination of a 1.5 mil. urethane film bonded to a polyester polyurethane acoustic foam. The black urethane film finish is extremely durable due to its highly elastic properties and is resistant to mechanical damage. This finish is suitable for very dirty environments and will withstand direct contact with water and most fluids found in industrial environments such as oils and cutting fluids.

Applications and Product Data · Performance Data · Typical Physical Properties · Absorption Coefficient

Applications and Product Data

Uses

Machine Guarding Liner
Engine Compartments
Enclosure and Silencer Liner

CONASORB UF is easy to apply and can be cut with common utility knives. For secure and permanent installations use specified adhesive - available from FirwinCorp.

Thickness¹

0.5 in.

Standard Dimensions

Sheets: 54" wide X 72", untrimmed (27 sq.ft.)
Rolls: 54" widerolis (UF-50 and UF-100 only)
CUSTOM DIE CUTTING CAN BE PROVIDED

¹ Also available - UF-200: 2.0 in.

Performance Data

Performance data is an extract from NRC - Ottawa report on tests according to ASTM C 423-90a.

NOTICE: Stated performance data is based on recognized testing methods. Product performance can be affected by field conditions and installation methods. Users of these products are responsible for determining suitability for their application and compliance with any legal provisions including those relating to health and safety.

Typical Physical Properties

Density		ASTM D 3574-86 — 1.8 - 2.2 lb. / cu. ft.

Tensile Strength of Foam		ASTM D 3574-86 — 15 psi, minimum

Tear Strength of Foam		ASTM D 3574-86 — 2.0 lb. / in. minimum

Flammability		MVSS 302 - Passes

Thermal Conductivity of Foam at 75°F (24°C)		ASTM C 518 - 0.27 Btu. in. / hr. ft.² ºF

Absorption Coefficient

Frequency (Hz)	Absorption Coefficient (UF-50)
80	0.05
100	0.04
125	0.04
160	0.07
200	0.06
250	0.07
315	0.11
400	0.25
500	0.54
630	1.04
800	0.74
1000	0.47
1250	0.38
1600	0.33
2000	0.31
2500	0.29
3150	0.26
4000	0.26
5000	0.31
6300	0.36
NRC	0.35

Part # UF-50, Conasorb UF

Uses

Thickness1

Standard Dimensions

Density

Tensile Strength of Foam

Tear Strength of Foam

Flammability

Thermal Conductivity of Foam at 75°F (24°C)

Thickness¹