Part # SW1800, Firwin SW1800 Insulation On Firwin Corp.

Products Insulation and
Safety Products Insulation Solutions by Industry Insulation Applications

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Categories > Stocked Insulation and Safety Products > Insulation Material > Part # SW1800


	Part # SW1800, Firwin SW1800 Insulation

larger image

Firwin SW1800 is a unique insulating blanket material with excellent performance in high-temperature applications with stability and resistance to chemical attack. SW1800 is unaffected by incidental spills of oil or water. Thermal and physical properties are restored after drying. This product has been specially developed to meet the demanding health and safety requirements of the European Union.

Features

Resistant to thermal shock
Provide low thermal conductivity and low heat storage
Enhanced solubility in body fluids
Cleaned during production to remove any organic matter to minimize out-gassing on initial startup.

Specifications · Physical Properties

Specifications

Applications		Blanket Removable insulation blankets Furnace kiln, reformer and boiler lining Laboratory ovens Furnace door lining and seals Furnace repair Annealing furnace linings Investment casting mold wrap Stress - relieving blankets Reusable steam and gas turbine insulation Expansion joints packing High temperature gasketing Fire protection Acoustical service Cryogenic insulation

Health and Safety		FW1800 is exonerated from any carcinogenic classification in the countries of the European Union under provisions of Directive 97/69/EC. They are therefore exempt from the requirement for labeling for carcinogenicity. Tests were carried out at the Fraunhofer Institute for Inhalation Toxicology in Hannover, Germany. FW1800 blanket is classified per UL 723 (ASTM E-84) Flame Spread Rating = 0, Smoke Developed Rating = 0. It is also classified by Underwriters Laboratories under “Batts and Blankets (BKNV)” in the UL Building Materials Directory, No. R8418. FW1800 is US Coast Guard approved for Steel and Aluminum vessels now defined under IMO Res.A.754(18)., complies with SOLAS safety objectives, and Fire Resisting Division for High Speed Craft (HSC).

Physical Properties

Colors

White

Thickness

1/2-2 in
6.25 - 50 mm

Density¹

4, 6, 8 pcf
64,96,128 kg/m3

Melting point, °F (°C)

2680ºF (1470ºC)

Maximum Temperature Rating

2012ºF (1100ºC)

Continuous use limit, °F (°C)

1832ºF (1000ºC)

Width

24, 48 in.
600, 1200 mm

Typical linear shrinkage, nominal % 24 hrs

@1000ºF (538ºC) – 2
@1800ºF (982ºC) – 3
@2282ºF (1250ºC) – <2

Chemical Analysis

Silica, SiO2	60 - 70
Calcium Oxide, CaO	25 - 35
Magnesium Oxide, MgO	4 - 7
Zirconia, ZrO2	-
Alumina, Al2O3	trace

Thermal Conductivity, Btu•in/hr•ft²•°F (w/m•k) (ASTM 201)

Blanket 607 (8 pcf)

Mean temperature	Btu • in/hr • ft2 • ºF	w/m • k
@500ºF (260ºC)	0.46	0.06
@1000ºF (538ºC)	0.97	0.14
@1500ºF (816ºC)	1.65	0.24
@1800ºF(982ºC)	2.09	0.3

Data are average results of tests conducted under standard procedures and are subject to variation. Data contained in this brochure are intended as a guide only.

¹ 4pcf only available in 1/2 up to 2" ** 2" thick, 48"wide only

Part # SW1800, Firwin SW1800 Insulation

Applications

Health and Safety