Removable Insulation Blankets are used to insulate engine parts, exhaust piping and components, and industrial process piping and machinery. In particular, applications which use diesel engines, such as power generation, off highway & on-highway vehicles, and marine often require insulation blankets to manage the heat that these engines generate.
1 - 1 of 1 | Results Per Page | View | Unit of Measure
1 
Request Information

How Are They constructed?

How Are They Installed?

Heat Performance of Insulation Media

N/A Removable insulation blankets are typically constructed in 3 layers1. The table and photos below illustrate the construction and materials used in a standard removable insulation blanket. Note that for more demanding and unique applications Firwin offers a wide range of alternative materials and construction.

Layers Material Temperature Limit Function
Outer Silicone Impregnated
Fiberglass		 Grey: 500º F (260º C)
Red: 600º F (316º C)		 Protective Cover
Aluminized Fiberglass 500ºF (260º C) Coating
1000º F (538º C) Fabric2
Middle Fiberglass Firwin 1200: 1200º F (649º C) Insulation Media (1 Inch)3
CMS Wool Firwin 1800: 1800º F (982º C)
Inner Stainless Steel Mesh4 Firwin 304SS: 1200º F (649º C) Contains Insulation Media
Firwin 309SS: 1800º F (982º C)

1Certain applications may require alternative construction methods – i.e. an extra layer may be added, as in the case of sound or fluid barriers.
2Aluminum coating may separate from fiberglass fabric at 500º F+, but fabric maintains good strength until 1000º F.
3Inch insulation suffices for most applications; however, thickness can be varied based on particular application requirements.
4The stainless steel inner liner may be replaced by a fiber-containing material in cases where fiber containment is a requirement.

 		N/A Removable insulation blankets are wrapped around the part to be insulated (an exhaust pipe in this illustration). The blankets are then fastened in place using lacing wire. Other fastening options, while less versatile, do exist, including snaps, straps, springs, and Velcro.

 		N/A The amount of heat reduction achieved by insulation blankets varies with the type of insulation media and its thickness. In the graph opposite, touch temperatures (i.e. the temperature of the outer protective cover) are given for 1” thick insulation blankets using Firwin 1200 and Firwin 1800 insulation media.
1 - 1 of 1 | Results Per Page | View | Unit of Measure
1